Futaba 7UAF, 7UAP - Manual (Page 15)

• FUNCTION AND DATA SETTING
Pressthe [MODE SELECT] To normal display mode
2-6
ELEVATOR -> > FLAP MIXING
Mixing activate/inhibit mode setting
Set the mode with the
keys.
+ : Activate
-: Inhibit
This is used to apply mixing from
elevator to flap. Mixing is usually
used so that the flaps are lowered
when the elevator is raised. It
makes circular maneuvers with
stunt aircraft smoother.
Mixing servo direction of operation setting
Set the flashing display to "+"
(or "—") with the
keys.
Held as long as the elevator
is in the R/U or L/D
direction.
Set the d i r e c t i o n of operation
with the keys.
+ : Normal direction
— : Reverse direction
Set for another direction of the
elevator by repeating
steps and
Mixing rate setting
Set the flashing display to "%"
with the
keys.
Held as long as the elevator
is in the R/U or L/D
direction.
Set the mixing rate with the
keys.
(When the + and — keys are
pressed simultaneously, 50% is
set.)
Set a different elevator
direction by repeating steps
and
To 6 - > 2
R/U: Right or up
L/D: Left or down
ON side
OFF side
• The elevator up side and down
side mixing rate can be set in-
dependently.
(INH: Inhibit state)
13 -