Futaba 8SSHP - Manual (Page 29)

FP-T8SSHP INVERTED FLIGHT SPECIFICATIONS
HANDLING PRECAUTIONS
• When the [C] inverted flight FS switch at the rear panel trimmers is switch-
ed to the INVERT position, normal flight <-> inverted flight switching,can
be performed with the Inverted flight ON-OFF switch.
• Note that the cyclic corrective pitch mixing (optional) function and inverted
flight function are not performed simultaneously.
* When the [30] CCPM switch and [C] inverted flight FS switch are set to
ON, the CCPM function has priority.
FP-T8SSHP INVERTED FLIGHT SPECIFICATIONS
TRIMMER PANEL
[A] Inverted flight low-side trimmer
B] Inverted flight high-side trimmer
30 CCPM switch (optional) [C] Inverted flight FS switch
Fig. 63
27