25 rotative open gimbal stick, Fig. 15 fig. 16, 26 inverted flight on/off switch – Futaba 8SSHP User Manual

Page 9

Advertising
background image

25 Rotative open gimbal stick

• Rotative open gimbal stick allows setting of the

operating direction of the stick within a range of
±34 degrees by losening screws 1 to 4 in the
figure 1/2 turn and turning the stick grille.

• Set the stick in the direction in which operation

is easiest.

• After setting, retighten the screws.

• The new gimbal is open. This one has been used

only for the most expensive radio controls. It
also has the built-in tension adjustment mecha-
nism on open gimbal for the first time. You can
adjust tension of spring for your best stick feel-
ing.

• Remove the rear panel and right side panel and

adjust the spring tension.

Right Side panel mounting screw

Fig. 15

Fig. 16

Turn with a Phillips screwdriver

The spring tension can be adjusted as desired by

removing the transmitter longer back cover and

turning the adjusting screw of each stick. Adjust
the spring tension for the best stick feel.

26 Inverted flight ON/OFF switch

An inverted flight ON/OFF switch is provided. The
pitch control, elevator, and rudder servos are
reversed for inverted flight when this switch is set
to ON, inverted flight is then extremely easy.

7

Advertising