Futaba 9VAP - Manual (Page 27)

Combination of Mixing Circuits
Programmable mixing circuits can be combined
with each other, or with built-in mixing circuits
by two methods.
1) Setting a Mixing Circuit No. in the "mas"
position (MX1, MX2, MX3, or MX4).
2) and setting.
Mixing Number Method
Depending upon which channels are selected on
different mixing circuits, MX1, MX2, MX3, or
MX4 can be displayed in the "mas" position. The
slave channel of the mixing number displayed in
the "mas" column, then becomes a Master chan-
nel on the mixing circuit line that it is displayed
and the two circuits are connected.
and Method
are displayed when the cursor is in
the "mas" position. are displayed
D 2) To activate XON or YON mixing, press the
will key. The character or
1.
2.
when the cursor is in the "slv" position.
display
display
appear next to the appropriate channel on the
left side of the screen to indicate that or
has been set.
3. Displayed when cursor is in "mas"
position.
Indicates that Master channel is
"slaved" to another circuit.
Displayed for slave channel
[25]