Futaba 9VAP - Manual (Page 38)

ADJUSTMENTS AND FLIGHT TECHNIQUES
V-TAIL
V-Tail mixing is used for certain sailplanes, scale model Beechcraft Bonanzas, and other air-
craft with V-Tails (Ruddervators). ELV (CH2) and RUD (CH4) are used as the operating
channels.
Setting Method
1) Display the WING TYPE screen and press the
program key.
2) To activate the V-Tail function, press the
program key. Press the key to deactivate
mixing.
6) Set the throw of the RUD (CH4) servo when
the rudder control stick is deflected by mov-
ing the cursor to the RUD line and setting the
throw and direction as in Step 3).
7) Return to the original WING TYPE screen by
3) Set the throw of the ELV (CH2) servo when
the elevator control stick is deflected by mov-
ing the cursor to the rate to be set with the
or cursor key and using the
, or program key. If necessary,
use the or program key to change
pressing the program key.
NOTE: V-Tail and ELEVON mixing cannot be
used together. Therefore, when V-Tail
is activated (
), Elevon mixing is
automatically deactivated ( ).
the servo operating direction.
4) Set the throw of the ELV-2ND (CH4) servo
when the elevator is deflected by moving the
cursor to the ELV-2ND line with the or
cursor key and setting the throw as de-
scribed in Step 3).
5) Set the throw of the RUD-2ND (CH2) servo
when the rudder control stick is deflected by
moving the cursor to the RUD-2ND line with
the
or cursor key and setting the
throw as in Step 3).