Futaba 9VHP - Manual (Page 13)

Setting Instructions
1) Display the standard screen.
2) Reset the Total Timer by pressing the two RES program keys simultaneously.
3) Press the TIM key. The TIMER program screen will appear on the display. The Up Timer will be dis-
played first.
4) Select the UP (Up), DN (Down), or RYT (Rhythmic) timer mode by pressing the
program key. The example shown is for the Up Timer.
5) To set the alarm time, switch to the TIMER SET display by pressing the SET key. Move the cursor to
the timer mode to be set usinq the cursor keys. Pressing the key will
Set the alarm time with the program keys.
When time and alarm setting is complete, return to the TIMER display by pressing the program key.
6) To start the timer, press the STA program key. The program key characters change to .When
the key is pressed, the timer stops.
7) When the program key is pressed, the display returns to the standard screen.
Timer Counting Range 1. UP/DN Timers 55min.59sec.
2. Total Timer 55 hrs. 59 min. 59 sec.
3. Rhythmic Timer 0.5 sec. to 59.9 sec. interval
[11]