Futaba 9VHP - Manual (Page 15)

Back Up Warning
When the stored data is lost, the characters
"BACK UP" blink on the screen and a buzzer
sounds. When the power switch is turned on
again, the error display disappears and all the
settings return to the factory-set values. When a
Back Up error occurs, the back-up lithium bat-
tery is probably dead, or there is trouble in the
system. To locate the cause, call your Futaba
service center. The back up lithium battery life
depends on the usage state, but is about 5 years.
SYSTEM PROGRAMMING
Press the EDIT program key of the standard screen.
Reversing Fail Safe Adjustable
Travel Volume Dual Rate
System functions are programmed
and adjusted by using the LCD
display screen, the five DATA
INPUT (Program) keys, and the
four CURSOR keys.
Adjustable
Function Rate
End
(Returns to
preceding screen)
Pressing the (EDIT) program key of the
standard screen will display the EDIT or "Menu"
screen. The
cursor keys can be and
used to move the cursor bar to Line 1, 2, or 3 of
the screen. The program keys are used to select
the desired programminq screen to be displayed.
NOTE: At all times, pressing the program
key will return the display to the next previous
screen. To return to the standard screen, just
keep pressing the
key.
[13]