General safety information – Campbell Hausfeld DG460300CK User Manual

Page 2

Advertising
background image

DG460300CK

General Safety
Information

(Cont’d.)

8. Use steady, even pressure when

using tool. Do not force. Too much
pressure can cause blade to break
or overheat.

9. Keep all nuts, bolts and screws tight

and ensure equipment is in safe
working condition.

10. Do not put hands near or under

moving parts.

WORK AREA

Do not operate a

power tool in an explosive atmosphere,
such as in the presence of flammable
liquids, gases, or dust. Power tools
create sparks which may ignite the
fumes or dust.

Keep work area

clean and well lighted. Cluttered
benches and dark areas invite
accidents.

Keep bystanders,

children, and visitors away while
operating a power tool. Distractions
can cause you to lose control.

ELECTRICAL SAFETY
Double insulated tools are

equipped

with

a polarized plug (one plug blade is wider
that the other). this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully into the outlet, turn the
plug over and insert into plug again.

Do not expose

power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.

Avoid body contact

with grounded surfaces such as pipes,
radiators, ranges, and refrigerators.
There is an increased risk of electric
shock if your body is grounded.

Do not abuse cord.

Never carry tool by its cord.

Never pull the cord to disconnect

from receptacle.

1. Make sure cord is located so that it

will not be stepped on, tripped
over, or otherwise subjected to
damage or stress.

2. Do not use an extension cord unless

absolutely necessary. Use of
improper extension cord could

!

WARNING

!

WARNING

!

WARNING

!

CAUTION

!

CAUTION

!

WARNING

result in a risk of fire and electric
shock. If an extension cord must be
used, make sure:
• That the pins on plug of extension
cord are the same number, size and
shape as those of plug.
• That the extension cord is
properly wired and in good
electrical condition.

• If an extension cord is to be used
outdoors it must be marked with
the suffix “W-A” or “W” following
the cord type designation to
indicate it is acceptable for outdoor
use. For example – SJTW-A

3. Do not expose to rain, snow or

frost.

PERSONAL SAFETY

Do not misuse this

product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness,
tingling, or pain occur, and consult
a physician.

1. Stay alert, watch what you are

doing, and use common sense when
operating a power tool. Do not use
tool while tired or under the
influence of drugs, alcohol, or
medication. A moment of
inattention while operating power
tools may result in serious personal
injury.

Avoid accidental

starting. Be sure switch is in the locked
or off position before making any
adjustments, changing accessories, or
storing the tool. Carrying tools with
your finger on the switch with the
switch on invites accidents.

2. Remove adjusting keys or wrenches

before turning on the tool. A key or
wrench attached to a rotating part
of the tool may result in personal
injury.

3. Do not overreach. Keep

proper footing and
balance at all times.
Proper footing and
balance enable better
control of the tool in unexpected
situations.

4. Always work in a well-

ventilated area. Wear an
OSHA-approved dust
mask and safety glasses.

!

CAUTION

!

WARNING

5. Hold tool by insulated gripping

surface when performing an
operation where the tool may
contact hidden wiring. Contacting a
“live” wire will make exposed metal
parts of the tool “live” and shock
the operator.

6. Keep hands away from moving

parts.

7. Use clamps or another practical way

to secure the workpiece to a stable
platform. Never hold work in your
hand, lap, or against other parts of
your body when cutting.

8. Always use blades of the correct

size and shape mounting holes.
Blades that do not match the
mounting hardware of the saw will
increase risk of injury to the user
and damage to the tool.

TOOL USE AND CARE

Do not use tool if

switch does not turn it on or off. Any
tool that cannot be controlled with the
switch is dangerous and must be
repaired.

1. This tool must NOT be modified or

used for any application other than
that for which it was designed.

Do not force the

tool. Use the correct tool for your
application. The correct tool will do the
job better and safer at the rate for
which it is designed.

2. Maintain tools with care. Keep

cutting tools sharp and clean.
Properly maintained tools with
sharp cutting edges are less likely
to bind and are easier to control.

3. Check for misalignment or binding

of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If
damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.

4. Use only accessories that are

recommended by the manufacturer
for your model. Accessories suitable
for one tool may create a risk of
injury when used on another tool.

5. Some wood contains preservatives

which can be toxic. Take extra care
to prevent inhalation and skin
contact when working with these
materials. Request and follow all
safety information available from
your material supplier.

!

CAUTION

!

WARNING

2

www.chpower.com

Operating Instructions and Parts Manual

23 Sp

Garantía Limitada

1

DURACION: A partir de la fecha de compra por el comprador original tal como se especifica a continuación:

Un año

2. QUIEN OTORGA ESTA GARANTIA (EL GARANTE: Campbell Hausfeld / The Scott Fetzer Company 100

Production Drive, Harrison, Ohio 45030 Teléfono: (800) 543-6400

3. QUIEN RECIBE ESTA GARANTIA (EL COMPRADOR): El comprador original (que no sea un revendedor) del

producto Campbell Hausfeld.

4. PRODUCTOS CUBIERTOS POR ESTA GARANTIA: Cualquier herramienta a motor de Campbell Hausfeld

proporcionada o fabricada por el garante.

5. COBERTURA DE LA GARANTIA: Los defectos substanciales de material y fabricación que ocurran dentro del

período de validez de la garantía.

6. LO QUE NO ESTA CUBIERTO POR ESTA GARANTIA:

A. Las garantías implícitas, incluyendo aquellas de comercialidad E IDONEIDAD PARA FINES

PARTICULARES, ESTAN LIMITADOS A LO ESPECIFICADO EN EL PARRAFO DE DURACION. Si este producto
es empleado para uso comercial, industrial o para alquiler, no se aplicará ninguna garantía. En algunos
estados no se permiten limitaciones a la duración de las garantías implícitas, por lo tanto, en tales casos
esta limitación no es aplicable.

B. CUALQUIER PERDIDA DAÑO INCIDENTAL, INDIRECTO O CONSECUENTE QUE PUEDA RESULTAR DE UN

DEFECTO, FALLA O MALFUNCIONAMIENTO DEL PRODUCTO CAMPBELL HAUSFELD. En algunos estados
no se permite la exclusión o limitación de daños incidentales o consecuentes, por lo tanto, en tales
casos esta limitación o exclusión no es aplicable

C. Cualquier falla que resulte de un accidente, abuso, negligencia o incumplimiento de las instrucciones de

funcionamiento y uso indicadas en el (los) manual(es) que se adjunta(n) al producto. Dichos accidentes,
abusos por parte del comprador, o falta de operar el producto siguiendo las instrucciones del manual
de instrucciones suministrado también debe incluir la desconexión o modificación de los instrumentos
de seguridad. Si dichos instrumentos de seguridad son desconectados, la garantía quedaría cancelada.

D. Los ajustes normales explicados en el(los) manual(es) suministrado(s) con el producto.

7.

RESPONSABILIDADES DEL GARANTE BAJO ESTA GARANTIA: Reparar o reemplazar, como lo decida el
Garante, los productos o componentes que estén defectuosos, se hayan dañado o hayan dejado de
funcionar adecuadamente, durante el período de validez de la garantía

8.

RESPONSABILIDADES DEL COMPRADOR BAJO ESTA GARANTIA:

A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto.

B. Entregar o enviar el producto o componente Campbell Hausfeld al Centro de Servicio autorizado

Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.

C. Seguir las instrucciones sobre operación y mantenimiento del producto, tal como se indica(n) en el (los)

manual(es) del propietario

Esta garantía limitada es válida sólo en los EE.UU., Canadá y México y otorga derechos legales específicos.
Usted también puede tener otros derechos que varían de un Estado a otro. o de un país a otro.

Advertising