ClearOne comm XAPTM 800 - Manual (Page 104)

98
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Appendices ~ Appendix E: Serial Commands
Command Function
NCSEL Selects/reports noise cancellation on/off for
each mic channel
NLP Selects/reports NLP for each mic channel
NOM Selects/reports NOM setting on output
channels
OFFA Selects/reports off attenuation mode for
Inputs 1–8
PAA Selects PA adapt mode for specified input
PP Selects/reports phantom power setting
PRESET Executes preset or report last executed preset
PRGSTRING Sets/reports a programmed string
RAMP Start/stops the gain ramp for an input, output,
or assignable processing block
REFSEL Selects/reports PA adapt mode for mic
outputs
Command Function
REFSET Selects/reports the output the reference channel
tracks
SERECHO Selects/reports the serial echo of the RS-232
SERMODE Selects/reports the serial mode of the RS-232
SFTYMUTE Selects/reports the state of the safety mute.
When on, the safety mute holds all outputs in a
muted state.
SIGGEN Selects/reports signal generator activation
SIGTOUT Sets the signal generator time out for the unit
SLVL Selects/reports mic auto level setting
STRING Executes a string for the RS-232 port
TOUT Selects/reports the title screen inactivity time
out
UID Reports unit ID (read only)
VER Reports unit version (read only)