ClearOne comm XAPTM 800 - Manual (Page 29)

23 System Configuration ~ Site Setup
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Site Setup
Creating a new site
New site files are created through the Site Properties window in G-Ware. A site file
contains all information about a particular installation including all unit settings and
properties. It also provides G-Ware with the necessary information to communicate
with the site hardware using your PC. Open G-Ware by double clicking the desktop
icon or by selecting G-Ware from the Start menu.
To create a new site
1. Open the Site Properties window by selecting New Site from the File menu
or by clicking the New Site button on the toolbar.
2. In the Site tab, enter the site name, author, company, location, room, and
description, using the Tab key or mouse to select each field.
3. Click the Comm tab. Select the COM port, baud rate, and flow control you
want to use. ClearOne recommends that you leave Flow Control set to
Hardware. The Software setting is not supported by XAP/PSR units and is
typically used with modems.
4. If you plan to use a modem, select Use Modem and enter the phone number,
initialization string, and reset string.
5. Click the Security tab. Enter the site password in the Site Password box.
Click File Access Password to create a password for the Site File.
Whenever a mouse click is
indicated in this manual, it
refers to the left mouse
button unless otherwise stated.
Figure 3.2.
New Site button
✍
Figure 3.3. Site Properties, Site tab Figure 3.4. Site Properties, Comm tab
You can enable flow
control using the XAP
front panel controls. See
page 16.
✍
Figure 3.5. Site Properties, Security tab