ClearOne comm XAPTM 800 - Manual (Page 80)

Operation ~ Utilities 74
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 5.15. Shortcut menu
G-Ware Switcher
G-Ware Switcher allows you to alternate between different G-Ware software versions
that are installed on the same PC. Prior to this release, the older version of G-Ware
had to be removed before the new version could be installed. If you want to reinstall
previous versions, you must install them in different directories or G-Ware Switcher
will not work properly. Install the current version last.
To use G-Ware Switcher
1. Launch G-Ware Switcher from the Windows Start menu by selecting
Programs, ClearOne G-Ware, and then G-Ware Switcher.
The G-Ware Switcher Utility Window opens. G-Ware Switcher
automatically searches the PC for G-Ware software versions and displays
them in the window.
2. Select the G-Ware version you want to use.
3. If the selected G-Ware version is older than any other version of G-Ware on
the PC, click Re-Register/Make Shortcuts.
4. Click Run. The selected G-Ware version launches. Click Refresh to initiate
a new search for G-Ware versions.
Copy and paste settings
In most areas of G-Ware software, right-clicking the mouse opens a shortcut menu.
The options on this menu change depending on which window you are in.
The version shown at left allows you to copy and paste unit settings and sites,
as well as add or remove units from a site. For example, to copy unit settings to
another unit, place the cursor in the blue area of the Flow Screen, then right-click
to open the shortcut menu. Select Copy Unit. Next, open (or add) another unit,
then right-click in the Flow Screen of the second unit to open the shortcut menu.
lick Paste Unit. This copies the properties of the first unit to the second one.
Figure 5.14. G-Ware Switcher