HONDA 1984 Civic Coupe - Owner's Manual - Manual (Page 124)

123
uu Operating the Switches Around the Steering Wheel u ENGINE START/STOP Button *
Continued
Co
ntrols
ENGINE START/STOP Button *
*1: Except U.S. models with automatic transmission (CVT)
■ Changing the Power Mode 1 ENGINE START/STOP Button *
ENGINE START/STOP Button Operating Range
You can start the engine when the smart entry
remote is inside the vehicle.
The engine may also run if the smart entry remote is
close to the door or window, even if it is outside the
vehicle.
ON mode:
Indicator in the button is off, if the engine is running.
If the smart entry remote battery is weak, the beeper
sounds and the TO START, HOLD REMOTE NEAR
START BUTTON message appears on the i-MID.
2 If the Smart Entry Remote Battery is Weak
P. 401
Do not leave the power mode in ACCESSORY or ON
when you get out.
Operating Range
Automatic Transmission (CVT) Manual Transmission
VEHICLE OFF (LOCK)
Indicator in the button is off.
The steering wheel is locked
*1 .
The power to all electrical
components is turned off.
Press the button without the shift
lever in
( P.
Shift to ( P then press the button.
Press the button.
Without pressing
the clutch pedal Without pressing
the brake pedal
ACCESSORY
Indicator in the button is on.
Indicator in the button blinks
(from ON to ACCESSORY).
Operate the audio system and
other accessories in this position.
ON
Indicator in the button is on.
All electrical components can be
used.
Indicator Indicator
Shift to ( P.
U.S. models
* Not available on all models
14 CIVIC 2D_SI-31TS86210.book 123 ページ ２０１４年１月２９日 水曜日 午後８時９分