HONDA 1984 Civic Coupe - Owner's Manual User Manual
Page 324
323
uu
When Driving
u
Tire Pressure Monitoring System (TPMS)
Driving
You can calibrate the system from the customized
features on the i-MID.
1. Turn the ignition switch to ON
(
w
*1
.
2. Press the MENU button to go to the
Vehicle Menu screen.
3. Select Customize Settings with the
(
+
/
(
-
button, then press the SOURCE button.
4. Select TPMS Calibration with the
(
+
/
(
-
button, then press the SOURCE button.
u
The display switches to the
customization setup screen, where you
can select Cancel or Initialize.
5. Select Yes with the
(
+
/
(
-
button, then
press the SOURCE button.
u
When the calibration is complete, the
The TPMS has been initialized.
message appears, and the display returns
to the customization menu screen.
• If the Unable to initialize TPMS. message
appears, repeat steps 4-5.
• The calibration process finishes
automatically.
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an
ignition switch.
1
•
TPMS cannot be calibrated if a compact spare tire is
installed.
•
The calibration process requires approximately 30
minutes of cumulative driving at speeds between
30-60 mph (48-97 km/h).
•
During this period, if the ignition is turned on and
the vehicle is not moved within 45 seconds, you
may notice the low tire pressure indicator comes on
briefly. This is normal and indicates that the
calibration process is not yet complete.
If the snow chains are installed, remove them before
calibrating the TPMS.
If the low tire pressure/TPMS indicator comes on even
when the properly inflated specified regular tires are
installed, have your vehicle checked by a dealer.
We recommend that the tires be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
14 CIVIC 2D_SI-31TS86210.book 323 ページ ２０１４年１月２９日 水曜日 午後８時９分