HONDA 1984 Civic Coupe - Owner's Manual - Manual (Page 399)

uu If a Tire Goes Flat u Changing a Flat Tire
398
Han
d
lin
g the U
n
expected
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order
indicated in the image. Go around,
tightening the nuts, two to three times in
this order.
Wheel nut torque:
80 lbf∙ft (108 N∙m, 11 kgf∙m)
1. Remove the center cap.
2. Place the flat tire face down in the spare tire
well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the
bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut wrench
back in the tool case. Store the case in the
trunk.
■ Storing the Flat Tire 1 Storing the Flat Tire
3 WARNING
Loose items can fly around the interior in a
crash and can seriously injure the
occupants.
Store the wheel, jack, and tools securely
before driving.
Spacer
Cone
Wing
Bolt
For compact spare tire
For full-
size tire
Models with aluminum wheels
All models
14 CIVIC 2D_SI-31TS86210.book 398 ページ ２０１４年１月２９日 水曜日 午後８時９分