IC Realtime 2Mp Full HD 3x Network PTZ Dome Camera (ICIPP2000M4) - Manual (Page 14)

7
4 WALL MOUNT BRACKET INSTALLATION
4.1 Component Installation
Wall mount bracket is shown as below. See Figure 4-1.
Figure 4-1
4.2 Installation
4.2.1 Installation Requirements
The wall mount speed dome can be installed in the hard construction wall in the indoor
environments. Before the installation, please make sure:
 The wall is thick enough to install the expansion bolt.
 The wall can at least sustain the 8x weight of the speed dome.
4.2.2 Installation Steps
1).Please draw four holes position in the wall according to the holes of the bottom of junction box.
Then you can dig four holes and insert the expansion bolts (not provided). Use four hex bolts and
flat washer to fix the box in the expansion bolts. See Figure 4-2.