IC Realtime 2Mp Full HD 3x Network PTZ Dome Camera (ICIPP2000M4) - Manual (Page 9)

2
2 SETUP BEFORE INSTALLATION
2.1 Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.
2.2 Open Device
Remove the package and then take out the device. Open the transparent cover and take out the
packing material EPE around the speed dome driver. Please remove the dustproof paster from
the pedestal. See Figure 2-1.
Figure 2-1
2.3 About Ceiling Installation Position Map
The ceiling installation position map is to define hard ceiling holes position and cable exit position.
The shadow part is the mechanical blind spot. Please paste it according to your actual
requirement to avoid mechanical blind spot. See Figure 2-2.