IC Realtime 2Mp Full HD 3x Network PTZ Dome Camera (ICIPP2000M4) - Manual (Page 15)

8
Figure 4-2
2). Connect the adapter block to the internal thread of the wall mount bracket. Pull the intelligent
speed dome composite cable through the adapter block and end of the column of the wall-mount
bracket and pull it out of the other end of the wall mount bracket. Line up the pedestal to the
internal hole of the adapter block. Insert four screws and rubber washer. See Figure 4-3. Please
make sure the cable exit is at the rear end of the wall mount bracket (or the arrow is at the front
of the bracket). Please note this step is very important. Please make sure the screws are
firm, otherwise, it may result in falling risk of the intelligent speed dome.
Figure 4-3
3) Complete the cable connection of the junction box and use 4 M8 screws to secure the wall
mount bracket in the box. Now the installation is complete. See Figure 4-4.