Interlogix MCR205-1T/1S User Manual - Manual (Page 41)

IFS MCR205-1T/1S User Manual 35
Note: When changing the Management VLAN Group settings, please make sure
that the TP or fiber port that connects to the administrator PC is in the same
VLAN Group, otherwise, connection will be lost making the further management
impossible until the unit is reset to factory defaults by pressing the reset button
for 10 seconds.
VLAN Per Port Setting
This function provides IEEE 802.1Q VLAN per port setting for TP and Fiber port
of MCR205-1T/1S. Press the “Apply” button to save the current configuration of
MCR205-1T/1S.
Figure 32: VLAN Per Port Setting Web Page screen
The VLAN Per Port Setting Web page includes the following configurable data:
Port TP port and Fiber port.
Egress Link Type Egress Link Type options for TP port and Fiber port, the available
options are:
• UnTag
• Tag
• ByPass
Default mode is UnTag.
PVID PVID assignment for TP port and Fiber port, the available options are
1 to 4094. Default mode is 1 to 16.
Accept Frame Type Define the Accept Frame Type and the available options are
• All
• Tagged Only
Default mode is All.