Interlogix MCR205-1T/1S User Manual User Manual
Page 48
42
IFS MCR205-1T/1S User Manual
Remote monitor
1. User instructs center Media Converter to issue a status notification request
frame defined in TS-1000 to get status of the terminal Media Converter.
2. Terminal Media Converter receives the status notification request frame and
sends out status response frame, which carries its current status.
Autonomous notification
1. Terminal Media Converter notifies the center Media Converter autonomously
with a status notification indication, if any change occurs in the status monitored
internally by the terminal Media Converter.
2. Center Media Converter, if supporting Option A, notifies the terminal Media
Converter autonomously with a status notification indication, if any change
occurs in the status monitored internally by the center Media Converter.
This function provides Remote TS-1000 OAM Setup of theMCR205-1T/1S. Press
the “Apply” button to save the latest configuration of MCR205-1T/1S.
Figure 39: MCR205-1T/1S Remote TS-1000 OAM Setup Web Page screen
Note:
Please use the MCR205-1T/1S as the Remote device.