Interlogix MCR205-1T/1S User Manual - Manual (Page 7)

IFS MCR205-1T/1S User Manual 1
Overview
Package Contents
Thank you for purchasing the IFS MCR205-1T/1S Fast Ethernet to SFP (fiber)
Media Converter.
Open the package containing the MCR205-1T/1S and carefully unpack it. The
box should contain the following items:
• MCR205-1T/1S x1
• CD ROM User Manual CD x1
• Quick Installation Guide x1
If any of the items in the package are damaged or missing, please contact your
distributor or IFS sales rep. If possible, retain the original carton and packaging
material in case of need to return the product for repair/replacement.
About the MCR205-1T/1S
The IFS MCR205-1T/1S Managed Media Converter that provides conversion
between a 10/100Base-TX and 100Base-FX network. The SFP slot utilizes
various single-mode/multi-mode media 100Base-FX SFP transceiver modules
with LC connectors. Based on the 100Base-FX transceiver selection; the
MCR205-1T/1S is capable of handling the data from 2km to 20km with high
reliability and flexibility.
The MCR205-1T/1S can be used as a stand-alone unit or as a slide-in module to
the IFS 19-inch MCR-R15 media converter chassis. The media converter chassis
can provide DC power to the MCR205-1T/1S to maintain the fiber optic network
at the central location.
The MCR205-1T/1S is equipped with a remote Web/SNMP interface. With its
built-in Web-based management, the MCR205-1T/1S offers an easy-to-use,
platform-independent management and configuration facility and can be
programmed for advanced management functions. Settings such as IP address
Configuration/DHCP Client function, password setting/firmware upgrade, system
reboot/factory default, port configuration that include TP/Fiber port speed duplex
mode setting, flow control setting and Ingress/Egress bandwidth control setting,
converter configuration that include maximum packet length setting,
Broadcast/Multicast/Unicast storm control setting, 16 IEEE 802.1Q VLAN groups
support and powerful Q-in-Q VLAN function, Quality of Service (QoS), TS-
1000/IEEE 802.3ah OAM function and TCP & UDP filter function. It supports
standard Simple Network Management Protocol (SNMP) and can be managed
via any standard-based management software as well.