Interlogix TruVision 360° - Manual (Page 11)

TruVision 360° Camera Bracket Installation Manual 9
4. Partially screw the three B screws into the
pendant bracket.
5. Connect the cables to the camera.
6. Remove the camera cover from the camera.
Open the small flap on the camera cover. Using
the hex wrench provided, unscrew the hex head
screw (1).
Using a flathead screwdriver, tighten the two
clips on the base of the camera (2) to detach the
cover (3).
7. Attach the camera to the cup base (A).
8. Re-attach the camera cover onto the camera (B).