Interlogix TruVision 360° - Manual (Page 6)

4 TruVision 360° Camera Bracket Installation Manual
360° camera installation
To mount the 360° camera on a round back box
1. Using the three A screws and the drywall
anchor, attach the back box to the wall.
Note: The four other screw holes are for
double gang.
2. Remove the camera cover from the
camera.
Open the small flap on the camera cover.
Using the hex wrench provided, unscrew
the hex head screw (1).
Using a flathead screwdriver, release the
two clips on the base of the camera (2) to
detach the cover (3).
3. Connect the cables to the camera.
4. Partially screw the three B screws into the
back box.
5. Attach the camera to the back box.
Align the holes on the base of the camera
with the three back box screws and rotate
the camera to lock it into position on the
back box.
Tighten the three B screws to securely fix
the camera to the back box.