Interlogix TruVision 360° - Manual (Page 7)

TruVision 360° Camera Bracket Installation Manual 5
Important: When mounting the camera to
the back box, ensure that the ‘UP’
reference on the camera base is pointing
upwards.
6. Re-attach the camera cover.
7. Tighten the cover screw in the camera
cover to securely reattach cover to the
camera.
To mount the 360° camera on a round angled back box
1. Using the three A screws and the drywall
anchor, attach the wedge back box to the
wall.
Note: The four other screw holes are for
double gang.
2. Remove the camera cover from the
camera.
Open the small flap on the camera cover.
Using the hex wrench provided, unscrew
the hex head screw (1).
Using a flathead screwdriver, release the
two clips on the base of the camera (2) to
detach the cover (3).