Personal, Administrator privilege commands - continued – iStorage datAshur Personal Manual User Manual
Page 13
#13
www.istorage-uk.com
iStorage datAshur Personal
®
Manual – v 31
personal
To display the firmware revision do the following:
• Unlock the drive in admin mode
• Double press and hold the
KEY Button as if changing the Admin PIN
• Enter ‘
R’ + ‘V’ followed by the KEY Button (e.g. 7 - 8 - KEY)
• The
RED
LED will blink according to the most-significant digit of revision.
• The
GREEN
LED will blink according to the least-significant digit.
For example, if the revision number is ‘13’, all indicators will turn off momentarily followed
by a
1 (one) blink from the
RED
LED followed by 3 (three) blinks from the
GREEN
LED.
The drive will then start double blinking to indicate that it is unlocked in admin mode.
11. Administrator Privilege Commands - continued
iv. Show security controller firmware version: