iStorage datAshur Personal Manual - Manual (Page 9)

#9
www.istorage-uk.com
iStorage datAshur Personal
®
Manual – v 31
personal
The following table depicts the possible actions when the drive is in different states:
User PIN Admin PIN Possible Actions
NOT SET NOT SET
Can set either User or Admin PIN
Cannot access drive until User or Admin PIN is defined
SET NOT SET
Can change User PIN when unlocked as User
Can set Admin PIN when unlocked with User PIN
Can access data when unlocked as User
NOT SET SET
Can set User PIN when drive is locked
Can unlock drive with Admin PIN
Can change Admin PIN when unlocked as Administrator
Can perform Administrator commands
SET SET
Can unlock drive with either User or Admin PIN
Can change User PIN when unlocked as User
Can change Admin PIN when unlocked as Administrator
INSTRUCTIONS LED ACTIVITY
Double press the KEY Button
and hold on the 2nd press for 3 seconds
will double blink once and then turn solid
Enter the New Admin PIN
and press KEY Button
will double blink if correct PIN entry or
will blink alternately if PIN entry incorrect
Re - Enter the New Admin PIN
and press KEY Button
will illuminate together for approximately
2 seconds and then:
will double blink indicating correct
PIN entry
Note that at this point the
following occurs: will double blink if 1 st and 2 nd entries match
will blink alternately if PIN entry incorrect
Insert your datAshur Personal into USB port
will illuminate in a constant state
will illuminate and flicker
Note: A double blink indicates the drive is unlocked in Admin mode.
A single blink indicates the drive is unlocked in User mode.
The drive has to be unlocked in user mode in order to proceed with configuring an Admin PIN.
It is set by following the instructions below: