User settings – Canon B115 User Manual
Page 38
8-2
USER SETTINGS
Name
Description
Settings
DATE & TIME
Set the date and time (24-hour clock) using the numeric buttons.
-
UNIT TELEPHONE #
Enter your fax number using the numeric buttons.
-
UNIT NAME
This is the name that appears at the top of each fax page you send (see p.
2-6).
-
TX TERMINAL ID
This option sets the parameters for the identification header that appears
on every page you send.
ON/OFF
TTI POSITION
Select the position of the TTI.
INSIDE IMAGE/
OUTSIDE IMAGE
TELEPHONE # MARK
Select the icon for the fax number.
TEL/FAX
SCAN CONTRAST
Set the density of the reproduction.
STANDARD/DARKER/
LIGHTER
OFFHOOK ALARM
Enable/disable the off hook alarm. The alarm alerts you that the handset is
not seated properly in its cradle.
ON/OFF
VOLUME CONTROL
Set the volume of the fax sounds.
-
LINE MONITOR VOL
Set the volume of the line monitor (sound during dialling).
0 (off)/1/2/3
CALLING VOLUME
Set the volume of the ring produced when the fax detects a voice call
during FAX/TEL switchover.
1/2/3
ALARM VOLUME
Set the volume of the error alarm sound.
0 (off)/1/2/3
KEYPAD VOLUME
Set the volume of the keypad.
0 (off)/1/2/3
RX CALL LEVEL
Set the ring tone.
STANDARD/HIGH
TEL LINE TYPE
Set the dialling method the fax uses to match the type of phone line you
have.
TOUCH TONE/
ROTARY PULSE
R-KEY SETTING
Set the type of PBX through which your fax is connected.
PSTN/PBX
PSTN
Your fax is connected to an outside line.
-
PBX: ACCESS TYPE
Your fax is connected through a PBX.
PREFIX/HOOKING
ACCESS NUMBER
If you select PREFIX, you can enter an outside line number of up to 19
digits.
-
AUTO VOICE DIAL
Enable/disable automatic dialling for UCanTalk.
ON/OFF