Canon B115 - Manual (Page 47)

7-4
Setting TAM MONITOR ______________________
TAM MONITOR allows you to screen all incoming calls.
Note
To use this feature, LINE MONITOR VOL (see p. 8-2) must be set to a setting other than 0. If LINE
MONITOR VOL is set to 0, you will not be able to hear any incoming messages as they are being recorded.
1
Press [Function].
D
Press [Start/Copy].
2
Use [ 3 ] or [ 4 ] to select TAM SETTINGS.
D
Press [Start/Copy].
3
Use [ 3 ] or [ 4 ] to select TAM MONITOR.
D
Press [Start/Copy].
4
Use [ 3 ] or [ 4 ] to select ON.
D
Press [Start/Copy].
5
Press [Stop].
Setting ends and the fax returns to standby mode.
USER SETTINGS
MESSAGE LENGTH
OFF