Canon B115 - Manual (Page 66)

5-3
Sending documents
5
SENDI
NG DO
CUMENTS
Memory sending ___________________________
The fax normally uses direct sending to send your document, but you can send it with memory sending (see
below). In this case, the fax quickly scans the document into memory. Then it sends the document from
memory. This means you do not have to wait for the fax to finish sending before you can retrieve your
original document.
You can send up to 15 A4-size pages at a time with memory sending (based on the Canon FAX Standard
Chart No.1, standard resolution).
Note
If MEMORY FULL appears on the LCD when you load the document into the document tray or during
the scanning process, re-start sending the document using direct sending (see p. 5-2).
1
Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2
Press [Function].
D
Press [Send Options].
3
Use [ 3 ] or [ 4 ] to select MEMORY TX.
D
Press [Start/Copy].
4
Dial the receiving party’s fax number.
Use one of the dialling methods described in this chapter
(see p. 5-2).
5
Press [Start/Copy] twice.
The fax scans the document into memory and begins
sending.
TEL= 34567890