Canon B115 - Manual (Page 104)

1-9
1
S
E
T
T
IN
G UP
Installing the BJ cartridge
The first time you set up your fax, you have to install the BJ cartridge before you can begin receiving and
copying documents.
For information on replacing the BJ cartridge, see p. 9-6.
Guidelines ________________________________
• Use only a Canon BX-3 Black BJ cartridge in your fax.
• Store BJ cartridges at room temperature.
• When the BJ cartridge print head is left exposed, it easily dries out and becomes unusable. To avoid this,
keep the followings:
– Keep BJ cartridges in the packaging until you are ready to use them.
– Never remove the BJ cartridge unless you are going to replace it.
– Keep the cartridge holder in the home position (on the right side of the fax) when you are not using the
fax.
• Replace BJ cartridges after one year of use.
The ink in the BJ cartridge is difficult to clean up if spilled. Follow the precautions below when handling
the BJ cartridge.
• Carefully remove packaging from BJ cartridges.
• Do not attempt to disassemble or refill BJ cartridges.
• Do not shake or drop BJ cartridges.
Note
If you need to unplug the fax, wait until it returns to standby mode (time and receive mode displayed on
the LCD). Otherwise the cartridge holder may not be in its home position; causing the BJ cartridge to
remain uncapped and dry out.
Caution
• Store BJ cartridges out of the reach of children.
If a child inadvertently ingests ink, consult a
physician immediately.
• Do not touch the precision components on the
BJ cartridge.
Do not touch these metallic areas.