Canon B115 - Manual (Page 92)

2-10
Registering one-touch speed dialling
numbers and names
The quickest way to dial a fax number is to use one-touch speed dialling. This allows you to dial a number
by pressing a single button. Before you can use one-touch speed dialling, you must register the receiving
number (up to 50 digits) with your fax.
You can also register the name of the party (up to 16 letters) and a voice tag*; the name appears on the
printout of the one-touch speed dialling list.
1
Press [Function].
2
Use [ 3 ] or [ 4 ] to select TEL REGISTRATION.
D
Press [Start/Copy].
3
Press [Start/Copy].
4
Use [ 3 ] or [ 4 ] to select the number of the one-
touch speed dialling button you want to use for the
number.
If a number is already registered under this one-touch speed
dialling button, the number is displayed on the LCD.**
5
Enter the party’s number (up to 50 digits) using the
numeric buttons.
D
Press [Start/Copy] to register the number.
6
Enter the party’s name (up to 16 letters) using the
numeric buttons (see p. 2-4).
D
Press [Start/Copy] to register the name.
7
Register the party’s voice tag for UCanTalk*.
See Registering UCanTalk voice tags, p. 2-13.
The fax asks you if you want to register the voice tag.
D
Press [ : ] or [#] to select YES or NO.
1-TOUCH SPD DIAL
01=
03= 2 50921
CANON :A
YES=(A) NO=(#)
* FAX-B140 only.
** To delete the name and number registered under the one-touch speed dialling button, press [Clear] and
[Start/Copy] after you perform steps 1 to 4 above.