Computer input – Canon Multimedia Projector LV-8235 UST User Manual
Page 37
37
Computer Input
To store the adjusted data, select
Store and then press the
Point
or the OK button. Move the highlight to one of the
Modes 1 to 10 in which you want to store, and then press
the OK button.
To clear the stored data, select
Mode free and then press
the Point
or the OK button. Move the highlight to the
Mode that you want to clear and then press the OK button.
Note:
• When input computer signal to the projector,
PC adjust
will become available.
To reset the adjusted data, select
Reset and press the OK
button. A confirmation box appears and then select
Yes. All
adjustments will return to their previous figures.
This Mode has stored
parameters.
Values of
Total dots, Horizontal
position, and Vertical position.
Mode free Menu
Vacant
Press OK button to store
adjusted data.
Press MENU button
to close this dialog
box.
Store Menu
Store
Mode free
Reset