Canon Multimedia Projector LV-8235 UST - Manual (Page 62)

62
Setting
Use the Point  buttons to select Off, On 1 or On 2.
Press the OK button to close the dialog box.
Change the PIN code lock setting
Enter a PIN code
Use the Point  buttons to enter a number. Press the
Point  button to fix the number and move the red frame
pointer to the next box. The number changes to . If you
fixed an incorrect number, use the Point  button to move
the pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit number.
After entering the four-digit number, move the pointer to
Set. Press the OK button so that you can start to operate
the projector.
If you entered an incorrect PIN code, PIN code and the
number () will turn red for a moment. Enter the
correct PIN code all over again.
Enter a PIN code
The PIN code can be changed to your desired four-digit
number.
Press the Point  button to select PIN code change and
press the OK button. The Current PIN code dialog box
appears.
Use the Point  buttons to set the current PIN code. The
New PIN code dialog box appears. Set a new PIN code, the
confirmation box appears, and choose Yes to set the new
PIN code.
Change the PIN code
CAUTION:
WHEN YOU HAVE CHANGED THE PIN CODE, WRITE
DOWN THE NEW PIN CODE AS A REMINDER, IF YOU
FORGET YOUR PIN CODE, THE PROJECTOR CAN NO
LONGER BE STARTED .
PIN code change
Note:
If you forget your PIN code and unable to change it, the
PIN code can be reset to the factory default setting
(1234) according to the following procedures.
When you reset the PIN code, the Logo PIN code and
Key lock will be reset, as well.
1. Unplug the AC Power Cord from the AC outlet.
2. Hold down the OK button on the projector and
connect the AC Power Cord into the outlet again.
Keep holding down the OK button until the POWER
indicator lights. The PIN code returns to the factory
default setting while the PIN code lock state will
remain the same as the previous set state.