Canon Multimedia Projector LV-8235 UST - Manual (Page 14)

14
Part Names and Functions
① POWER indicator
– Turn red when the projector is in the stand-by
mode.
– Turn green while the projector is under operation
(pp.22, 76).
– Blink green in the Power management mode
(pp.59, 76)
② WARNING TEMP . indicator
Emit a red light when the projector detects abnor-
mal condition. This also blinks red when the inter-
nal temperature of the projector exceeds the oper-
ating range (pp. 66, 76).
③ LAMP REPLACE indicator
Turn yellow when the life of the projection lamp
draws to an end (pp. 69, 76).
④ 3D indicator
Turn blue when the projector is in 3D mode (pp.
50-51, 76).
⑤ OK button
– Execute the selected item (p.25).
– Zoom in and out the image in the Digital zoom
mode (p.41).
⑥ POWER button
Turn the projector on or off (pp.22-24).
⑦ AUTO SET button
Execute the setting of Auto setup (includes Auto
input function and Auto PC function). (pp.28, 53)
⑧ KEYSTONE button
Correct the keystone distortion (pp.28, 42, 49).
⑨ MENU button
Open or close the On-Screen Menu (p.25).
⑩ Point  buttons
– Select an item or adjust the value in the
On-Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.41).
– Adjust the volume level (with Point  buttons)
(p.29).
– Adjust the screen size (with Point  buttons)
(p.27).
⑪ Infrared Remote Receiver
The protruding shape allows wide-angle remote
controller signal reception.
Top Controls and Indicators
① ② ③ ④
⑥ ⑦ ⑧ ⑨
⑩
⑤
⑪