Canon Multimedia Projector LV-8235 UST - Manual (Page 18)

18
Installation
Connecting to a Computer
Cables used for connection
• VGA cables (Mini D-sub 15 pin) *
• Audio cables
• HDMI-DVI cable
(*One cable is supplied; other cables are not supplied with the projector.)
Note:
• Input sound to the COMPUTER 1/COMPONENT AUDIO IN terminal when using the COMPUTER IN 1/COMPONENT IN
terminal as input.
• When the cable is of the longer variety, it is advisable to use the COMPUTER IN 1/COMPONENT IN and not the
COMPUTER IN 2 /MONITOR OUT.
• Analog PC and component signals can be output from the COMPUTER IN 2/MONITOR OUT terminal when using the
COMPUTER IN 2/MONITOR OUT terminal as output.
• When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
 Note:
Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables.
External Audio Equipment
Audio
cable
(stereo)
Monitor
Output
AUDIO OUT
(stereo)
VGA
cable
COMPUTER IN 2/
MONITOR OUT
COMPUTER IN 1 /
COMPONENT IN
Monitor Output
or
Monitor Input
VGA
cable
HDMI-DVI
cable
DVI
Output
HDMI
This terminal is switch-
able. Set up the terminal
as COMPUTER IN 2 or
MONITOR OUT (P. 56).
COMPUTER 1/
COMPONENT
AUDIO IN
Audio cable
(stereo)
Audio
Output
Audio
Input
VGA
cable