Canon Multimedia Projector LV-8235 UST - Manual (Page 30)

30
Basic Operation
Remote Controller Operation
Using the remote controller for some frequently used operations is advisable. Just pressing one of the buttons
enables you to make the desired operation quickly without calling up the On-Screen Menu.
Press the COMPUTER 1/2, HDMI, VIDEO, S-VIDEO and
COMPONENT buttons on the remote controller to select the
input source. See pages 32-33, 43-44 for details.
Display the input source information: Input, H-sync freq .,
V-sync freq ., Aspect, Language, Lamp status, Lamp
counter, Power management mode, Key lock, PIN code
lock, Remote controller and SERIAL NO .. (p.65)
Press the D.ZOOM +/– buttons on the remote controller to
enter to the D. zoom +/– mode. See page 41 for details.
Remote Controller
3D
FREEZE
button
D .ZOOM
buttons
LAMP
button
Note:
See the next page for the description of
other buttons.
COMPUTER 1/2
buttons
VIDEO
button
Press the LAMP button on the remote controller to select
the lamp mode for changing the brightness on the screen.
INFO .
button
S-VIDEO
button
COMPONENT
button
HDMI
button
Press the FREEZE button on the remote controller to freeze
the picture on the screen and turn off the sound. To cancel
the Freeze function, press the FREEZE button again or
press any other button.
Fig.1 will appear on the Screen menu while the Freeze
function is working.
Fig .1
Note:
When use the MUTE button to release the Freeze function,
the mute function can not be operated at the same time.
Normal ..... Normal brightness.
Eco .......... Lower brightness reduces the lamp power
consumption and extends the lamp life.
FREEZE buton
INFO . button
D.ZOOM +/– buttons
LAMP button
COMPUTER 1, COMPUTER 2, HDMI buttons
VIDEO, S-VIDEO, COMPONENT buttons