Canon Multimedia Projector LV-8235 UST - Manual (Page 43)

43
Choose VIDEO or S-VODEO by pressing the VIDEO button
or the S-VIDEO button on the remote controller.
1
2
Input Menu
Input Source Selection (VIDEO, S-VIDEO)
Video Input
When video input signal is connected to the
VIDEO jack, select VIDEO.
VIDEO
When video input signal is connected to the
S-VIDEO jack, select S-VIDEO.
S-VIDEO
Note:
When the Auto input function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.53).
3D
Remote Controller
VIDEO button
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select Input and
then press the Point  or the OK button.
Use the Point  buttons to select either VIDEO or
S-VIDEO and then press the OK button.
S-VIDEO button
VIDEO
S-VIDEO
Direct Operation
Menu Operation