Canon DR-6030C - Manual (Page 75)

Software Setup 69
Chapter 3
• When scanning a page with a dark area at the left or right edge
• When scanning a glossy or reflective document
• When the brightness setting is incorrect
• When Custom setting is selected in the Gamma Settings dialog box
☞ Depending on the application program, operation may become unstable
when [Auto-detection] is enabled. In that case, [Auto-detection] should be
disabled.
Dots per inch
Select the scanning resolution.
☞ Higher resolutions provide clearer images, but produce larger files.
☞ When the selected resolution is 300 dpi or less, the [Moire Reduction]
setting is enabled to allow reduction of Moire patterns in scanned images.
☞ When the selected resolution is 400 or 600 dpi, the [Image Quality] setting
is enabled.
Scanning Side
Select which page side(s) to scan.
[Simplex]
Scan only the front (top) side of documents loaded at the feeder inlet.
[Duplex]
Scan both sides of documents.
[Skip Blank Page]
As each document page is scanned, its scanned image is judged as to whether it
is blank, and if so, the image is not saved.
☞ Selecting [Skip Blank Page] enables the [Setting] button, which opens the
[Blank Skip Setting] dialog box.
☞ Adjust the [Content density] setting in the [Blank Skip Setting] dialog box
if blank pages are not skipped, or if non-blank pages are skipped.