Canon DR-6030C - Manual (Page 97)

Software Setup 91
Chapter 3
First and Second Counter Settings Dialog Boxes
These dialog boxes open when you click the respective [Change] button in the
[Character String Settings for the Addon] dialog box. Here you can make settings
for counters to be added onto scanned images.
Start Value
Enter the start value for the counter.
Increment
This is the counter increment value. The counter increments by the value
entered here.
Increment Trigger
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increments when a batch separation occurs according to the Batch
Separation settings on the [Others] tab sheet. (See “Batch Separation (ISIS
driver only),” on p. 83.)
[Every Page]
Increments once per page.
[None]
No counter increment occurs.
Reset Value
Select the initial value when the counter is reset.
Reset Trigger
Specifies the type of event that resets the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs according to the Batch
Separation settings on the [Others] tab sheet. (See “Batch Separation (ISIS
driver only),” on p. 83.)
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs.