Canon DR-6030C - Manual (Page 99)

Software Setup 93
Chapter 3
Scanning Non-Standard-Size Documents
• To scan non-standard-size documents
If non-standard-size documents are scanned with a standard size selected for
the Page Size setting on the [Basic] tab sheet, black regions may appear around
the scanned document image. To scan non-standard-size documents, select
[Auto-detection] as the [Page Size]. Page size is then detected automatically.
(See “Page Size,” on p. 68.)
• To scan long-page documents
Set the scanning mode to Long Document mode, and select [Auto-detection]
as the [Page Size] in the Properties dialog box. Document pages may be up to
three meter long.
(See “Long Document Mode,” on p. 55, and “Page Size,” on p. 68)
• To register a non-standard page size
A non-standard page size not already registered as a page size selection can be
saved as a custom page size by selecting the [Custom] button in the Scan Area
dialog box. (See “User Preferences,” on p. 66.)
Adjusting the Scan Area
• To scan only part of the document page
You can specify any area on the page in the Scan Area dialog box. However,
scan area settings are ignored when [Auto-detection] is selected as the [Page
Size]. (See “[Scan Area] Dialog Box,” on p. 73.)