Maintenance, Save these instructions, Warning – Intex 12 FT X 30 IN METAL FRAME POOL 2013 User Manual

Page 13: Pool maintenance & chemicals troubleshooting, Page 13 english

Advertising
background image

(87PO) ROUND METAL FRAME POOL ENGLISH 7.5” X 10.3” PANTONE 295U 07/20/2012

87PO

SAVE THESE INSTRUCTIONS

Page 13

English

MAINTENANCE

PROBLEM

DESCRIPTION

CAUSE

REMEDY

ALGAE

COLORED

WATER

SUSPENDED

MATTER IN

WATER

CHRONIC LOW

WATER LEVEL

SEDIMENT ON

POOL BOTTOM

SURFACE DEBRIS

• Greenish water.

• Green or black spots

on pool liner.

• Pool liner is slippery

and/or has a bad odor.

• Water turns blue,

brown, or black when

first treated with

chlorine.

• Water is cloudy or

milky.

• Level is lower than

on previous day.

• Dirt or sand on pool

floor.

• Leaves, insects etc.

• Chlorine and pH levels

need adjustment.

• Copper, iron or

manganese in water

being oxidized by the

added chlorine.

• "Hard water" caused by

pH level being too high.

• Chlorine content is low.

• Foreign matter in water.

• Rip or hole in pool liner

or hoses. Tighten caps.

• Heavy use, getting in

and out of pool.

• Pool too close to trees.

• Super chlorinate with shock

treatment. Correct pH to your

pool store's recommended level.

• Vacuum pool bottom.

• Maintain proper chlorine level.

• Adjust pH to recommended

level.

• Run filter until water is clear.

• Replace cartridge frequently.

• Correct the pH level. Check with

your pool dealer for advice.

• Check for proper chlorine level.

• Clean or replace your filter cartridge.

• Repair with patch kit.

• Finger tighten all caps.

• Replace the hoses.

• Use Intex pool vacuum to

clean bottom of pool.

• Use Intex pool skimmer.

Water maintenance

The maintenance of a proper water balance through appropriate use of sanitizers is the

single most important factor in maximizing the life and appearance of the liner as well

as ensuring clean, healthy and safe water. Proper technique is important for water

testing and treating the pool water. See your pool professional for chemical, test kits

and testing procedures. Be sure to read and follow the written instructions from the

chemical manufacturer.

1. Never let chlorine come in contact with the liner if it is not completely dissolved. Dissolve

granular or tablet chlorine first in a bucket of water, then add it to the pool water. Likewise

with liquid chlorine; mix it immediately and thoroughly with the pool water.

2. Never mix chemicals together. Add the chemicals to the pool water separately. Thoroughly

dissolve each chemical before adding another one to the water.

3. An Intex pool skimmer and an Intex pool vacuum are available to assist in maintaining

clean pool water. See your pool dealer for these pool accessories.

4. Do not use a pressure washer to clean the pool.

REMEMBER TO

• Protect all pool occupants from possible water-related illnesses by keeping the

pool water clean and sanitized. Do not swallow the pool water. Always practice

good hygiene.

• Keep your pool clean and clear. The pool floor must be visible at all times from

the outside barrier of the pool.

• Keep children away from pool covers to avoid entanglement, drowning, or other

serious injury.

WARNING

POOL MAINTENANCE & CHEMICALS

TROUBLESHOOTING

Advertising
This manual is related to the following products: