Compaq N1020V - Manual (Page 122)

5–16 Maintenance and Service Guide
Removal and Replacement Procedures
1. Prepare the computer for disassembly (Section 5.3).
2. Turn the computer bottom side up with the rear panel facing
forward.
3. Remove the PM2.5 × 4.0 screw 1 that secures the mini PCI
compartment cover to the base enclosure (Figure 5-12).
4. Slide the cover to the left 2.
5. Lift the left edge of the cover and swing it to the right 3.
6. Remove the cover.
Figure 5-12. Removing the Mini PCI Communications
Slot Cover
✎
Mini PCI compartment covers are available with carbon finish for
Evo Notebook N1020v and N1000v models and silver finish for
Presario 1500 models, and are included in the Miscellaneous
Plastics/Hardware Kit, spare part number 285541-001.