Compaq N1020V - Manual (Page 162)

5–56 Maintenance and Service Guide
Removal and Replacement Procedures
5.22 System Board
✎
When replacing the system board, ensure that the following
components are removed from the old system board and installed
on the new system board:
■ Memory expansion boards (Section 5.5)
■ Mini PCI communications board (Section 5.6)
■ Disk cell RTC battery (Section 5.7)
■ Processor (Section 5.12)
■ Modem cable (Section 5.23)
1. Prepare the computer for disassembly (Section 5.3) and
remove the following components:
a. LED cover (Section 5.9)
b. Keyboard (Section 5.10)
c. Heat spreader (Section 5.11)
d. Display (Section 5.13)
e. Palm rest (Section 5.14)
f. Charger board and shield (Section 5.18)
g. Speaker assembly (Section 5.19)
System Board
Spare Part Number Information
System boards (do not contain memory)
for use only with Evo Notebook N1020v models and Presario
1500 models with config. codes beginning with “L”
for use only with Evo Notebook N1000v models and Presario
1500 models with config. codes beginning with “K”
311282-001
285515-001