Canon 8200 - Manual (Page 27)

26
Install the BJ Print Head.
1 Install the BJ Print Head in the BJ Print Head holder where you
removed the Scanner Cartridge.
2 Lower the lock lever to lock the BJ Print Head in place.
Close the front cover.
Set the media in the printer.
• For details about loading paper in the sheet feeder,
see Chapter 3.
Start the print job.
1 Open the image that you saved from the software application such
as SimpleText.
2 From the File menu, select Print.
3 For the Print Mode, select Photo.
4 For the Media Type, select the media that you set in the printer.
5 Make sure that the POWER/ERROR lamp lights green, then click
the Print button to start printing.
• When the media is ejected from the printer, printing has
completed.
Close the software application.
7.
6.
Reference
5.
4.
3.
Click!
Click!
Click!
chap-1 (E) 10/2/99 6:09 AM Page 26