Canon 8200 - Manual (Page 46)

Loading Paper and Special Print Media
45
Loading Paper and Special Print Media
Loading Glossy Photo Paper GP - 301
Raise the paper thickness lever to the mark.
Raise the paper rest, lower and pull out the paper output
tray.
Slide the paper guide completely to the left.
Set the Roller Cleaning Plate (provided with the printer)
into the Sheet Feeder.
• With the patches up and pointing down, align the Roller Cleaning
Plate with the right side of the sheet feeder.
• The Roller Cleaning Plate is used to load Glossy Photo Paper as
well as clean the paper rollers.
With the glossy side facing up, place the sheet of Glossy
Photo Paper on top of the Roller Cleaning Plate, align
the sheet with the right side of the sheet feeder and
insert the sheet into the printer until it stops.
• If you load more than one sheet, fan the sheets to
remove static cling and tap the edges against a
flat surface to align the sheets.
• Handle media carefully by its edges. Never touch
the print surface of the sheets. Dirt or fingerprints
on the print surface will adversely affect print
quality.
• You can load up to 10 sheets of Glossy Photo Paper in
the sheet feeder.
Move the paper guide to the left edge of the sheet.
6.
Memo
Caution
5.
4.
3.
2.
1.
Glossy side
Patches
chap-3 (E) 10/2/99 6:23 AM Page 45