Canon 8200 - Manual (Page 45)

44
Raise the paper thickness lever to the mark.
Raise the paper rest, lower and pull out the paper output
tray.
Slide the paper guide completely to the left.
With the print side facing up, align a sheet of High Gloss
Photo Film with the right side of the sheet feeder and
insert the sheet into the printer until it stops.
• Handle media carefully by its edges. Never touch
the print surface of the sheets. Dirt or fingerprints
on the print surface will adversely affect print
quality.
• You can load only 1 sheet of High Gloss Photo Film in
the sheet feeder.
• Load the sheet of High Gloss Photo Film with the cut
corner in the upper right corner to ensure that the
correct print side is facing up.
Move the paper guide to the left edge of the sheet.
5.
Memo
Caution
4.
3.
2.
1.
Loading High Gloss Photo Film HG - 201
Cut corner
chap-3 (E) 10/2/99 6:23 AM Page 44