CatEye EC-C400R - Manual (Page 7)

7
11
Follow the steps starting from the next page and assemble the unit as shown in the figure below.
S
TARTING WITH ASSEMBLY
R
EC-3700
4
2
1
3
5
6
7
Mount the front leg.
• Remove the leg plate from the main unit. (This plate will not be used
for assembly.)
• Place the front leg (with casters) under the main unit as shown in
figure and fasten screws securely with the hexagon wrench making
sure nuts locate at the bottom of the leg.
2
Mount the rear leg.
• Place the rear leg (with level adjuster) under the rear support pipe as
shown in figure and fasten screws securely with the hexagon wrench
making sure nuts locate at the bottom of the leg.
1
3
7 8
6
4 2
5
1
Front leg(with casters)
Hexagon wrench
Nuts
Nuts
Rear leg(with level adjuster)