Creda Heating Solution - Manual (Page 32)

32 +44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Product Description Rating Height A Width B Depth C
CDF1 75 771002 Compact downflow (constant) 1kW 240mm 235mm 135mm
CDF2T 75 771003 Compact downflow (variable thermostat) 2kW 240mm 235mm 135mm
CDF2 75 771001 Compact downflow (pre-set step down) 2kW 240mm 235mm 135mm
CDF
Compact downflow fan heaters
Product Selector
Technical Specification
Dimensions
Available in three models, they are ideal
for bathroom, shower room, kitchen,
conservatory or garage locations.
Key features
• 1kW constant heat (CDF1)
• 2kW with rotary variable thermostat (CDF2T)
• 2kW steps back to 1kW after warm up (CDF2)
• Pull cord operated
• Power on neon indicator
• Two integral safety devices
“
Fast response downflow heaters offer a low cost
solution for rapid heating on demand.
”
• Element - stitched ‘black heat’ type
• Protection - thermal cut-off and safety overheat
• Thermostat - mechanical bi-metal type (CDF2T only)
• Weight 1.45kg
• Supply - 230/240V AC single phase
Electrical products installed in bathrooms
Heating products installed in Zone 2 of a bathroom must carry an IP rating of at least IPX4 (IPX5 if water jets are going to be used
in that area).
All electrical products must be connected in compliance with IEE wiring regulations (17th edition) and the circuit protected by an RCD.
Underfloor heating
& fan heaters