Creda Heating Solution - Manual (Page 41)

When mounted on the inside of an
external door they create a ‘hot air curtain’
to prevent cold draughts entering a
building. In summer they can be switched
to fan only to form a barrier against
incoming dust and provide a refreshing
breeze. Suitable for a range of doorway
applications in commercial premises such
as shops, offices, workshops and stores,
the Sunscreen and Sunspot heaters are
designed for fast installation with key
hole-slots for vertical mounting or
brackets providing complete flexibility of
adjustment from vertical to horizontal.
Easily accessible switches allow the option
to run the unit on fan only or at half or full
heat output.
Key features
• Two heat settings or cold
• High volume throughput
• Smooth running, shaded pole motor, with
‘greased-for-life’ bearings
• Integral switching for ease of installation
• Tangential blower
Sunspot 2.25kW
The Sunspot is a modular unit almost
half the width of the Sunscreen.
It can be used with a Sunscreen for
wider doorways or on its own as a high
level wall-mounted fan heater in
commercial premises.
• Element - open coil supported by
ceramic insulators
• Zinc coated steel, powder coated body
white/grey
• Shaded pole motor
• Protection - thermal safety cut-out
• Supply - 230/240V AC single phase
• Can be fixed directly to the wall using the key
slot holes provided or angled using the
brackets provided
• Mounting directly above the door at a height of
between 1.8 and 2.25m
Model Reference Rating Height A Width B Depth C
CSS3 50 813976 3kW 185mm 610mm 105mm
CSS45 50 813977 4.5kW 185mm 610mm 105mm
CSS225 50 813975 2.25kW 185mm 350mm 105mm
Wall Mount Ceiling Mount
Sunscreen
Warm air curtains
Product Selector
Dimensions
“
Sunscreen and Sunspot
heaters provide the ideal
solution for draught exclusion
on external doors.
”
Technical Specification
Commercial
space heating
41 +44 (0) 1733 456789 www.creda-heating.co.uk