Creda Heating Solution - Manual (Page 38)

Model Reference Rating Height A Width B Depth C
CSL2 75 771601 2kW 108mm 1,215mm 71mm
CSL3 75 771602 3kW 108mm 1,671mm 71mm
Sunslim
Commercial radiant heaters
Product Selector
The Sunslim can be wall-mounted or
ceiling hung.
Key features
• Instant, directional radiant heat
• Available in 2kW and 3kW versions
• Completely silent in operation
• Lightweight and robust
• Corrosion resistant
• Suitable for bracket or chain mounting
• Easy to install
• Ideal for localised heating in large covered
areas such as factories and workshops
“
Sunslim is a low cost,
robust and easy to install
radiant heater. Its tilt
mounting allows heat to be
localised, or directed to a
general area.
”
• Element - ‘black heat’ type
• Zinc coated steel body/matt black end caps
• Chrome plated steel guards
• Anodised aluminium reflector
• Supply - 230/240V AC single phase
• Minimum mounting height 2 metres
• 300mm minimum clearance above the heater
• 500mm minimum clearance on either side
• Installation notes: High temperature cable must
be used. We recommend the use of a residual
current device (RCD)
Dimensions
Technical Specification
0.3
0.1
2.0
2.0
0.5
Sunslim - Minimum
mounting distances
(metres)
Sunslim heated area
Heating index 3kW 2kW
H L W H L W
10 4.0 5.24 5.49 3.3 4.11 4.53
12 3.6 4.88 4.94 3.0 3.84 4.12
14 3.2 4.51 4.39 2.7 3.57 3.70
16 3.5 4.33 4.12 2.5 3.38 3.43
18 2.8 4.14 3.84 - - -
H = mounting height (determined by on-site requirements) L = length of the heated area W = width of the heated area
Commercial
space heating
38 +44 (0) 1733 456789 www.creda-heating.co.uk