Clarity CLS 45i - Manual (Page 11)


HEADSET jack. 2.5mm jack to allow the
use of a headset. Your handset, when connected
to a headset (not included) will provide
you with hands-free communication. In the
event you wish to purchase a headset for
your CLS45i, please contact Plantronics at
1-800-544-4660 for a location near you. We
recommend the use of Plantronics models
M-130 and M-175. Headsets are also available
at most retail outlets and Special Needs
distributors that sell telephone equipment..
Other Handset Features:

BELT CLIP. Your CLS45i has a detach-
able belt clip on the back of the handset.

RING FLASHER. This red light, located
on the top right back corner of the handset,
flashes when your telephone is ringing.

NEW CALL / IN USE indicator.
Located at the top right-front corner of
the earpiece, it flashes to let you know
you have a new call or to indicate that the
handset is in use.
Caller ID Display Indicator
When you receive a telephone call, the LCD
display provides a number of Caller ID details,
which are explained below.
• New Call/Call counter This line dis-
plays the number of calls and new calls in
standby mode. If you have a call that has
not yet been reviewed, the display reads
“New” and the New Call / In Use light on
the handset flashes.
• Repeated Call Indicator This indicator
lights up and displays “RPT” if the displayed
telephone number has called more than
once.
• Clock Shows the real time (AM/PM)
format, or the time stamp of a Caller ID
record.
• Date Displays the date (mm/dd) format,
or the date stamp of a Caller ID record.
• 12-Digit number line Displays the
caller’s number or digits you dialed.
7
Features – Handset

New Call / In
Use indicator
 RING FLASHER

TONE LO HI
switch

AUDIO
jack

HEADSET
jack
Handset
Right Side